Dedicated circuit installation in Minnesota
A circuit just for your equipment, so it gets the power it needs and stops tripping everything else.
- We confirm your panel has room before we add a circuit
- Breaker, wire and outlet are matched to the equipment
- Each new breaker is labeled and the circuit tested
- MN License #EA807704
- Bonded & insured
- Permits & inspections handled
- Free quotes
Get your free quote
Two short steps. No obligation.
We will call you to talk through the job and set up your free quote. Need us sooner? Call 612-445-2794.
Your email app should open with your request filled in. Press send, or call 612-445-2794.
Dedicated Circuits, start to finish
- Load and panel check
- Correct breaker and wire size
- Cleanest practical cable route
- Outlet or hardwired connection
- GFCI or AFCI where required
- Labeled breaker and tested circuit
We handle dedicated circuits across Minnesota, including Minneapolis, St. Paul, Bloomington, Edina, Plymouth, Maple Grove, Burnsville, Eden Prairie, Fridley and Minnetonka. See every city we serve.
What our customers say
Real customer reviews from our Google Business Profile, quoted word for word.
These Electricians are excellent and professional at their work with reasonable prices.
Professional work. 10/10 recommend.
I highly recommend Prime Time Electric. They installed 3 canned lights on my garage and they look (and perform) great. The cost was reasonable and the team was professional and efficient. Great experience.
Three steps to a finished job
Tell us what you need
Call 612-445-2794 or send the short form. Quotes are free.
Get a written scope and price
We look at the job and put the scope and price in writing before any work starts.
We do the work and get it inspected
We pull the permit, do the work, and the inspector signs off.
Common questions
How do I know if something needs a dedicated circuit?
Can any outlet be made dedicated?
What if my panel is full?
Does a dedicated circuit make my power bill higher?
Want the details first? Read our guides: Home EV Charger Installation Guide for Minnesota Homeowners, 100 Amp vs 200 Amp Service: Does Your Minnesota Home Need More? and When to Replace an Electrical Panel: Warning Signs in Older Homes.
More about dedicated circuits
A dedicated circuit feeds one appliance, one piece of equipment or one defined area, with its own breaker and wiring back to the panel. Nothing else shares it. That separation prevents the nuisance tripping that happens when a microwave, toaster and coffee maker are on the same line, and it keeps motors and sensitive electronics from dropping power each time another load switches on.
Some equipment is required to be on its own circuit by the manufacturer or by code. Others simply work better that way. Which is which depends on the equipment's nameplate rating, the voltage it uses and the room it is in. We read the nameplate, check the panel for space and capacity, and size the breaker and wire to match.
We cover the full range of residential needs here, from a 120V circuit for a freezer or sump pump to 240V for a welder, hot tub or large shop tool. For kitchen and laundry appliances in particular, see our page on appliance and equipment circuits.
When you need it
- A breaker trips whenever two particular items run at the same time.
- Lights dim or flicker when a motor, compressor or heater starts up.
- You are adding a freezer, sump pump, space heater, or other equipment that should not share a circuit.
- A workshop, garage or hobby space needs power for saws, compressors, welders or kilns.
- A new appliance needs 240V and your home only has 120V at that location.
- Equipment instructions call for a dedicated circuit, and the current outlet is shared.
- You rely on an extension cord or power strip to run something permanently, which is a sign the circuit is missing.
What’s included, in detail
We review the equipment's rating and confirm the panel has room and capacity for another circuit.
Breaker, cable and receptacle or connection matched to the equipment's voltage and amperage.
Wiring run through basements, attics, crawl spaces or walls by the cleanest practical route.
A receptacle of the correct configuration, or a direct hardwired connection where required.
GFCI or AFCI protection included where the location and equipment call for it.
The new breaker is labeled in the panel and the circuit tested before we leave.
Our process
- Identify the load
We look at the equipment, its nameplate and where it needs to go.
- Plan the circuit
We pick the circuit rating and route and check the panel for space.
- Run and connect
Cable is installed from the panel to the equipment location and terminated at both ends.
- Test and label
We verify voltage and protection, and label the panel.
More questions
Is a permit required?
Guides
Often done together
Dedicated circuits work often goes together with appliance and equipment circuits; EV charger installation; and panel upgrades and replacements. We can quote them together.
Ready for your free circuit quote?
Call or send the short form. You get a written scope and price before any work starts.